Powkiddy RGB10 MAX Retro Portable Odroid Super Clone Console

Buy Powkiddy RGB10 MAX Retro Portable Odroid Super Clone Console with shipping from Spain to all of Europe in 24 / 72h and 2 years Warranty.

• Emulators: Play Station 1, NeoGeo, MAME, Sega Genesis, NES, FC, FBA, SNES, N64, Dreamcast, PSP, …
• Emuelec Odroid Go Super System
• RK3326 Cortex-A35 Quad Core 1.3 GHz - 1.5 GHz CPU
• 1 GB DDR3L RAM
• Mali-G31 MP2 GPU
• Button control L1 / L2 / L3 - R1 / R2 / R3
• 5-inch IPS HD screen with 854 × 480 resolution
• Built-in Wi-Fi
• Bluetooth
• External Micro SD slot 64Gb with firmware (no pre-installed games)
• USB Type-C, OTG-USB and 3.5mm audio jack port
• Languages: Spanish, English, French, German, Italian, Portuguese, Chinese, etc ...
• 4200mah battery

Powkiddy returns to the fray with its new renewed console, the RGB10 Max, it is an improved clone of the Odroid Go Super with better quality materials and finishes.

5 ″ large screen

We start talking about the screen where we get up to 5 inches in size. In this range of screen sizes this is probably the best console out there. The quality of the screen, even in the case of a console of around € 100, is of quite good quality, we have a Full HD IPS resolution of 854 × 480 pixels.

Without a doubt, the materials of construction of the screen of the Powkiddy RGB10 Max are much better compared to the Odroid Go Super.

A known chip that will give us good results

As for the processor that governs this retro console, we have a well-known chip that carry good quality portable consoles such as the Anbernic RG351M or RG351V, we are talking about a quad-core RK3226 Cortex-A35 chip that reaches a speed of up to 1.5 Ghz .

The processor is accompanied by 1 GB of DDR3L RAM and a Mali-G31 MP2 GPU that give us enough strength to emulate many games from the most demanding platforms such as PS1, Nintendo 64 or PSP.

Linux-based Emuelec interface

This new retro Powkiddy RGB10 Max console has a Linux-based operating system with an Emuelec plug and play interface. With which, once the console is turned on, we will access a menu where we will have different emulator platforms that will allow us to emulate in a simple and intuitive way.

This console is capable of emulating different platforms such as PSP, N64, NDS, NES, SMD, SFC, CPS, MD, GBA, GBC, GB, FBA, PS, PSX, FC, GGMS, NEOGEO or BIN.

Wi-Fi and Bluetooth multiplayer connection

One of the things that draws our attention about this retro console is that we have Wi-Fi and bluetooth connection from which we can link an external controller or enjoy a multiplayer mode to play with the same console between two players.

Good quality buttons and finishes

Regarding the buttons that we have in this Powkiddy RGB10 Max, we are struck by the fact that we have joysticks on each side of the screen that also act as L3 and R3 buttons. In the upper left part we have a comfortable crosshead and on the opposite side we have four buttons X, Y, A and B. In the lower corners of each side we have two small buttons that are SELECT and START. At the top we have the L1 / L2 and R1 / R2 buttons on each side.

To finish we have different buttons and connections at the top such as OTG / DC and USB1 / OTG connections, SD card slot, 3.5 jack to insert headphones, volume up and down buttons or switch key and Wi-Fi key buttons.

Enough 4,200 mAh battery

In the section of the battery you can be calm since this console has a battery of 4200 milliamps. You will have enough battery not to be left half in a game.

At kiboTEK we ship the Powkiddy RGB10 MAX Retro Portable Odroid Super Clone Console to more than 30 countries other than Europe in 24 / 72h with a two-year warranty. Check and calculate the shipping costs in the cart by inserting your address. Free expenses for Spain from € 100.